Light Gauge Cut to Length Line
The 3×850mm Cut to Length Line typically integrates a decoiler, leveling unit, servo feeding system, flying shear, conveyor or stacking system, and electrical control system. The leveling section removes coil memory and improves flatness, while the servo-controlled feeding and flying shear ensure precise sheet length and consistent cutting performance.
The machine can process various types of steel and metal coils according to the required material specifications. Its compact configuration and automated control system make it an effective solution for manufacturers producing flat sheets for construction, fabrication, automotive components, electrical equipment, and general metalworking applications.
Key Features:
- Maximum processing thickness: 3 mm
- Maximum coil width: 850 mm
- Equipped with Flying Shearing
- Continuous cutting without frequent line stops
- High cutting accuracy and repeatability
- Automatic leveling for improved sheet flatness
- Servo-controlled material feeding
- PLC-based automatic control system
- Suitable for continuous steel coil processing
- Efficient and stable production performance
- Flexible configuration according to customer requirements
0.3–3.0mm × 850mm Flying Shear Production Line
- Material Specifications
Specification | Requirement |
Applicable Materials | Cold-Rolled Steel, Galvanized Steel, Pickled Steel |
Sheet Thickness | 0.3–3.0 mm |
Sheet Width | Min. 80 mm – Max. 850 mm |
Tensile Strength | 200–600 N/mm² |
Yield Strength | 120–500 N/mm² |
Coil ID | 508 mm |
Coil OD | 800–1800 mm |
Maximum Coil Weight | 10,000 kg |
- Production Line Specifications
- Maximum Line Speed: 70 m/min
- Material Feeding Direction: From left to right or from right to left when viewed from the operator side
- Material Feeding Reference: Production centerline
- Production Line Height: FL + 1000 mm
- Threading Speed: 15 m/min
- Cutting Length:
- 200–1000 mm for the first stack
- 200–2500 mm for the second stack
- Stacking Weight:
- First stack: 3000 kg
- Second stack: 3000 kg
- Control System: Servo control
- Threading Standard: Production centerline
Flying shearing allows cutting during continuous material movement, reducing line stoppages and improving production speed, efficiency, and overall throughput.
This type of CTL machine is commonly used for steel service centers, metal fabrication, construction materials, automotive components, electrical equipment, and general sheet metal processing.
Flying shearing cuts the material while it continues moving through the line, whereas start-stop shearing requires the strip to stop before each cut. Flying shearing is therefore more suitable for continuous and higher-efficiency production.
The machine is equipped with a Flying Shearing System, which cuts the strip while it is continuously moving through the line. This helps improve production efficiency compared with conventional start-stop shearing.
The machine can process metal coils with a maximum thickness of 3 mm, depending on the material type and required production configuration.
